Bismuth Isooctanoate

Overview:

Chinese name: Bismuth isooctanoate

Alias: BDMA, dimethylbenzylamine, benzyldimethylamine, catalyst BDMA, rigid foam catalyst BDMA, N-benzyldimethylamine, BDMA, CAS 103-83-3, Lupragen N103, PC CAT NP60

Bismuth isooctanoate

bismuth 2-ethylhexanoate

67874-71-9

Chinese name: Bismuth 2-ethylhexanoate
English name: Bismuth Octoate
Molecular formula: Bi[OOCCH(C2H5)C4H9]3
Relative molecular mass: 638.61
CAS Number: 67874-71-9

Bismuth 2-ethylhexanoate CAS 67874-71-9

Physical and chemical performance:

Bismuth isooctanoate is a light yellow transparent oily liquid under normal conditions.
Viscosity (25°C): 50mPa.s
Density (25°C): 1.22g/cm3
Water solubility: insoluble in water
Flash point (PMCC): 158℃
hydroxyl value: 0

Apps:

Bismuth isooctanoate is a bismuth metal carboxylate catalyst that can be used as a co-catalyst for tertiary amines to accelerate the carbamate The reaction and curing of acid esters; bismuth isooctanoate can be used to replace tin metal catalysts in flexible block foams, high-density flexible foams, spray foams, microcellular foams, and rigid foam systems.

Bismuth isooctanoate

bismuth 2-ethylhexanoate

67874-71-9

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits.

PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3

Over view:

Common Name: Benzyl Dimethyl Amine

Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,

Physical and chemical properties:

Appearance	Form: transprant light yellow  liquid
Odour	no data available
PH	10 at 10 g/l at 20 °C
Melting point/freezing point	Melting point/range: -75 °C – lit.
Initial boiling point and boiling range	181 – 184 °C at 1.020 hPa – lit.
Flash point	53 °C – closed cup
Evaporation rate	no data available
Flammability (solid, gas)	Upper explosion limit: 6,3 %(V)
Upper/lower flammability or explosive limits	Lower explosion limit: 0,9 %(V)
Relative density	0,9 g/cm3 at 25 °C
Water solubility	soluble
Partition coefficient: noctanol/water	log Pow: 1,87
Molar formular	C9H13N
Molar mass	135.21

Features and uses:

A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.

BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.

BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.

BDMA is used in flexible slabstock and rigid foam applications.

It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.

BDMA is also used for flexible slabstock foam applications.

Storage Information ：

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

Package:

180KG/Steel Drum

(DABCO BDMA/Niax BDMA/ PC Cat NP60/ Addocat DB/ Jeffcat BDMA/ Lupragen N103)