Hotline
organotin / related product

Benzyl dimethylamine

Overview:

Name: Dimethylbenzylamine

Alias:BDMA,N-dimthylbenzylamine, dimethylbenzylamine, benzyldimethylamine, catalystBDMA, rigid foam catalystBDMA,N-Benzyldimethylamine,BDMA,CAS 103 -83-3

Molecular formula: C9H13N;

Relative molecular mass: 135.20;

CAS number: 103-83-3;

colorless to slightly yellow transparent liquid, soluble in ethanol, soluble in hot water, slightly soluble in cold water;

Purity≥99%;

Moisture content≤0.5%;

Viscosity (25℃): 90mPa.s;

Density (25℃): 0.897g/cm3;

Freezing point: -75℃;

Boiling range: 178-184℃;

Refractive index (25℃): 1.5011;

Flash point (TCC): 54℃;

Vapor pressure (20℃): 200Pa

Physical and chemical properties

Appearance properties

colorless to light yellow liquid.

Solubility

Slightly soluble in cold water, soluble in hot water, and miscible in alcohol and ether.

melting point

-75 °C

Boiling point

183-184 °C765 mm Hg(lit.)

Density

0.9 g/mL at 25 °C(lit.)

Refractive Index

n20/D1.501(lit.)

Flash point

130 °F

Storage conditions

Flammables area

Water solubility

8 g/L (20 ºC)

BRN

1099620

Purpose:

BDMA in the polyurethane industry is a catalyst for polyester polyurethane block soft foam, polyurethane rigid foam, polyurethane sheet and adhesive coating , Mainly used for rigid foam, can make polyurethane foam have good initial fluidity and uniform cells, and have better adhesion between foam and substrate;

BDMA In the field of organic synthesis, it is mainly used as a catalyst, corrosion inhibitor, acid neutralization for the synthesis of dehydrohalogen in organic drugs Accelerators, electron microscope slice embedding accelerators, etc.;

BDMA is also used in the synthesis of quaternary ammonium salts, the production of cationic surface active powerful fungicides, etc.;

BDMA In epoxy resin, it is mainly used to promote the curing system of acid anhydride, polyamide, aliphatic amine, etc., and accelerate the curing of products. Used as a curing accelerator in epoxy resin electronic potting materials, encapsulating materials, epoxy floor coatings, and marine paints;

BDMA Specific application examples include: carbon fiber/monomolecular epoxy resin-based composite laminates, electrophoretic coatings for epoxy substrates , Dry-type transformer potting glue;

Second First Benzyl amine benzyl dimethylamine catalyst BDMA Hard foam catalyst BDMA N-benzyl dimethyl amine BDMA CAS 103-83-3

Dimethylbenzylamine benzyldimethylamine catalyst BDMA hard foam catalyst BDMA N-benzyldimethylamine BDMA CAS 103-83-3

Alias:

Dimethylbenzylamine

Benzyldimethylamine

BDMA

103-83-3

Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits.

PU Catalyst: BDMA (benzyldimethylamine) CAS:103-83-3

Over view:

Common Name: Benzyl Dimethyl Amine

Other Chemical Names: N,N-Dimethylbenzylamine, Benzenemethamine, N,N-dimethyl-;Benzenemethanamine,N,N-dimethyl-;Benzylamine,

Physical and chemical properties:

Appearance

Form: transprant light yellow  liquid

Odour

no data available

PH

10 at 10 g/l at 20 °C

Melting point/freezing point

Melting point/range: -75 °C – lit.

Initial boiling point and boiling range

181 – 184 °C at 1.020 hPa – lit.

Flash point

53 °C – closed cup

Evaporation rate

no data available

Flammability (solid, gas)

Upper explosion limit: 6,3 %(V)

Upper/lower flammability

or explosive limits

Lower explosion limit: 0,9 %(V)

Relative density

0,9 g/cm3 at 25 °C

Water solubility

soluble

Partition coefficient: noctanol/water

log Pow: 1,87

Molar formular

C9H13N

Molar mass

135.21

Features and uses:

A liquid tertiary amine catalyst. Can improve foam cure and demolding time. It is an excellent candidate to consider for use in water-NCO reaction in rigid polyurethane foams.

BDMA is typically suitable to replace DMCHA in formulations using a high level of water as blowing or co-blowing agent can reduce surface friability and improve adhesion of foam to substrates.

BDMA promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability. It has a characteristic but low amine odor, and is soluble in water and in most organic solvents.

BDMA is used in flexible slabstock and rigid foam applications.

It promotes the urethane reaction and is commonly used in high-water rigid foam applications to reduce friability.

BDMA is also used for flexible slabstock foam applications.

Storage Information 

Recommends that our catalysts be stored in a dry and cool area under appropriate ventilation conditions. Each container should be closed tightly to avoid contamination with moisture or other negative influences that could change the products’ performance in the end use.

Package:

180KG/Steel Drum

(DABCO BDMA/Niax BDMA/ PC Cat NP60/ Addocat DB/ Jeffcat BDMA/ Lupragen N103)

Tags:
Prev:
Next: