Product name: Strong gel catalyst T120
Alias: T120,1185-81-5, di(dodecylthio) dibutyltin, strong gel catalyst, strong gel catalyst T120, microporous Elastomer catalyst T120, rigid foam catalyst T120
Product description: T120 is CAS: 1185-81-5 Molecular formula: C32H68S2Sn Molecular weight: 635.72 EINECS number: 214-688-7 Related category: Metal organics Mol file: 1185-81-5.mol.
|CAS 1185-81-5||Di(dodecylthio)dibutyltin||Strong gel catalyst||Strong gel catalyst T120||Microporous elastomer catalyst T120||Hard foam catalyst T120|
Molecular formula: C32H68S2Sn
Related category: Metal Organics
Chinese name: T120
Boiling point: 160°C 10mm
Density: 1,04 g/cm3
Refractive index: 1.4992
Physical and chemical performance
Flash point: >204°C
Viscosity (25℃) about 20mPa.s
Steam pressure 1.3kPa
The catalyst belongs to the category of dibutyltinmercaptide.
oily liquid, insoluble in water.
The thermal activity, the catalytic reaction is very slow at the beginning, and then quickly increases.
Strong gel catalyst with good hydrolytic stability, higher catalytic activity than DBTDL, good storage stability, used for microporous elastomers and rigid foams.
Keep it unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Store in a cool, dry place, keep the container tightly closed, and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, as this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided as much as possible.