Trimerization catalyst 46
Product name: Polyurethane metal carboxylate catalyst 46
Alias: potassium acetate glycol solution, 46, PC CAT TKA, polyurethane metal carboxylate catalyst 46, metal carboxylate catalyst 46, catalyst 46, three alyst 46
Product description: 46 trimerization catalyst for polyurethane PIP rigid foam system
Appearance: white liquid
Viscosity (25℃, mPa.s): 200
Density (25℃,g/cm3): 1.26
Water solubility: soluble in water
Flash point (PMCC,℃):>110
hydroxyl value (mgKOH/g): 1122
Catalyst 46 is a polyurethane metal carboxylate catalyst, which can promote the isocyanurate reaction (trimerization catalytic reaction) in the polyurethane rigid foam PIP system , Can be used for all kinds of rigid foam.
Typical physical properties:
|Appearance||colorless transparent liquid|
|Flash point, ℃||＞110|
High trimer conversion rate
Catalyst 46 is widely used in various polyurethane applications, such as PIP rigid board foam, semi-rigid foam molded instrument panel foam, PIR rigid foam, and Energy-absorbing rigid foam.
Catalyst 46 is used to promote the isocyanate reaction (trimerization reaction) and can be used in various rigid foams.
Keep it unopened for two years
Storage and transportation:
Should be sealed and stored in a dry, cool and ventilated warehouse
200KG/bucket Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the product performance from being mixed with other substances such as waterproof grade. Store in a cool, dry place, keep the container tightly closed, and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, take a shower and change clothes. Store contaminated clothes separately and use them after washing. Maintain good hygiene habits. The company recommends that all polyurethane catalysts be stored in a dry and cool place with proper ventilation. All storage containers must be well sealed to avoid contact with water or other influential substances, as this may change the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided as much as possible.